Min.Order | Unit Price |
---|---|
20 Kilogram | USD 40 / Kilogram |
WC-17Ni, 15-38um thermal spray Tungsten Carbide Powder is generally best using High Velocity Oxygen Fuel (HVOF) spray HVOF Tungsten Carbide Coating. More corrosion-resistant and tougher than WC-Co, but lower hardness higher toughness, but lower hardness than WC 10Ni in Tungsten Carbide Coating, excellent low-temperature wear properties up to 500 °C. It mainly can be applies on ball valves, gate valves, oil field equipment etc. The manufacturing process is Agglomerated and Sintered which brings better coating deposit efficiency.
Spray System | HVOF |
Coating Micro-hardness | 950-1300 HV0.3 |
Bonding Strength | ≥70MPa |
Porosity | <1% |
Deposit Efficiency | 45-65% |
Maximum Service Temperature | 500℃ |
Product Categories : Thermal Spray Materials > Tungsten Carbide Powder
Fine 86WC-10Co-4Cr 5-30um Thermal Spray Powder
WC-20Cr3C2-7Ni Thermal Spray Powder 5-30um
WC-20Cr3C2-7Ni Tungsten Carbide Thermal Spray Powder 15-45um
42WC-42Cr3C2-16Ni Thermal Spray Powder 15-45um
WC-12Co Crushed cemented carbide grits
WC-Co-Cr 15-38um HVOF fine carbide Powder
15-53um WC-17Co Agglomerated and sintered powder
GP07N WC-20Cr3C2-7Ni 15-45um Thermal Spray Powder