GPNi23L-26 53-125µm is our customized Nickel Alloy Powder and Laser Cladding Powder for glass mould. The hardness can readch 28-32HRC.Mostly is used for blank and finish mould. Compare with Metal Spray Coating, laser cladding with a higher effiency, and better heat putting. Lower dilution rate than PTA Powder.
Glass mould is an important part for glass bottle making. Because of its lifetime has the effect for the quality and quantity for bottle . The life scan of mould is the focus of every glass mold.
Laser cladding powder for glass mould deliver lower heat distortion, reduced dilation, low porosity levels, and better surface uniformity for the new surface layera good metallurgical bonding, and good anti corrosion surface layer than Pta Welding Powder.
Except as Laser cladding powder, GPNi23L also can be used for Thermal Spray Coating like HVOF, arc spray ,PTA Welding process etc.
Special chemical content design and easy for welding with good flow rate for forming cladding layer. The clading layer is uniform and dense, moderate hardness, high temperature resistance and oxidation resistance;
Chemical Composition Of Powder:
Ni:Bal
Cr: 0.4
Fe:0.2
Si: 2.35
B: 1.4
O: 0.01
C: 0.01
Product Categories : Laser Cladding Powder > Nickel Alloy Powder
NiCrBSi Nickel Based Alloy Powder 53-150um HRC40
NiCrBSi Nickel Based Alloy Powder 20-53um
Ni60 AA Alloy Powder 58-62HRC
Laser Cladding Inconel 625 Powder
Higher Temperature Alloy Powder Inconel 625
Higher Temperature Alloy Inconel 625 Powder
Laser Cladding Ni Alloy Powder For Glass Mould
PTA Welding Nickel Alloy Powder For Glass Mould