Flux cored wire for wear plate

Here is a brief introduction about us.

Company: Luoyang Golden Egret Geotools Co., Ltd

Employees: 719

Registered Capital: USD 161,538,461.00

Our products are including: Flux cored wires, tungsten carbide welding tubular rods, Flexible welding ropes, PTA powders, thermal spray pwoder, Tungsten Carbide Grits etc.

Our company is the subsidiaries of XTC (Xiamen Tungsten Company).

XTC is the company controlled 30% high grade tungsten mineral resources in the world, and produce over 30,000 tons tungsten smelting products every year.

The employees in our group are over 14,000.

Here is our flux cored wire introduction:

Prouct Grade: Flux cored wire for wear plate 

Specification: GSQD621Mo-4
Diameter: D1.6 mm

Hardness: 58-64HRC

G65: 0.040 ± 0.005 g

B611: 1.070±0.005 g

Welding Process: carbon-dioxide arc welding

Weight: 15kg/Spool

Chemical composition:

Fe: Bal. C: 3.95-4.15 Cr: 21.5-23.5 Mn:0.75-0.95 Si: 0.65-0.85 B:0.5-0.7 Mo:0.6-0.8 

Welding Parameter

Electricity: 220-280A

Voltage: 22-28V

Current Type: DCEP

Shield airflow: Pure carbon dioxide

Gas flow: 20L/min

Welding Torch Angle: 80°

This flux cored wire is suitable for carbon dioxide or argon gas mixed gas shield welding, no special requirements for the base material, to meet the various low carbon steel, alloy steel, forgings, castings overlay welding. Suitable for wear plat, shield scraper, hob, cut-off teeth, crusher hammer head, agricultural machinery tools and other parts subject to serious abrasive wear surface strengthening and repair

This flux cored wire for wear plate is a high-carbon, high-chromium cast iron type wire with good impact resistance, dense and uniform distribution of the hard phase of the overlay layer, excellent wear resistance, and excellent mechanical and metallurgical properties, suitable for surface

Note: The composition of the flux cored wire for wear plate can be customized and adjusted according to customer needs.

Product Categories : Weld Materials > Welding Wires