Manufacture nickel alloy inconel 625 thermal spray wire

Here is a brief introduction about us.

Company: Luoyang Golden Egret Geotools Co., Ltd

Employees: 719

Registered Capital: USD 161,538,461.00

Our products are including: Flux cored wires, nickel base alloy wire, tungsten carbide welding tubular rods, welding ropes, PTA powders, Thermal Spray Powder, Tungsten Carbide Grits, Tungsten Carbide Pellets etc.

INCONEL 625 ALLOY WIRE DESCRIPTIONS

Inconel 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy. This material can be used because of its high strength, excellent uniform corrosion resistance, resistance to stress cracking and excellent pitting resistance in 500°-600°F (260-316°C) water. Its outstanding strength and toughness in the temperature range from cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals columbium and molybdenum in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress corrosion cracking to chloride ions.

INCONEL 625 APPLICATIONS

Heat exchanger header bars

Wire rope for mooring cables,

Metal seals

Chemical processing components

CHEMISTRY TYPICAL

Nickel: 58.00 min

Chromium: 20.0-23.0

Iron: 5 max

Molybdenum: 8.0-10.0

Columbium + Tantalum: 3.15-4.15

Manganese: 0.50 max

Carbon: 0.10 max

Silicon: 0.50 max

Phosphorus: 0.015 max

Sulfur: 0.015 max

Aluminum: 0.40 max

Titanium: 0.40 max

Cobalt: 1.00 max

PHYSICAL PROPERTIES

Ultimate Tensile Strength: 120 KSI min (827 MPa min)

Yield Strength: (0.2% offset) 60 KSI min (414 MPa min)

Elongation: 30% min ( gauges > 0.040inched

Product Categories : Weld Materials > Welding Wires